以质量求发展 靠诚信行天下

QUALITY FOR DEVELOPMENT

和谐创新、开拓市场、团结拼搏、共创未来
“Calassification”

产品详情

KTP

KTP

KTP crystal is mostly used as nonlinear crystals for frequency doubling of solid-state Nd:YAG crystal or Nd:YVO4 crystal laser, as it has large nonlinear optical coefficients, wide angular bandwidth and small walk-off angle, broad temperature and spectral bandwidth. KTP crystal also has a high electro-optic(E-O) coefficient and low dielectric constant, and large figure of merit, these features make it also widely used in electro-optic applications.

  • 产品描述
  • Introduction:

KTP crystal is mostly used as nonlinear crystals for frequency doubling of solid-state Nd:YAG crystal or Nd:YVO4 crystal laser, as it has large nonlinear optical coefficients, wide angular bandwidth and small walk-off angle, broad temperature and spectral bandwidth. KTP crystal also has a high electro-optic(E-O) coefficient and low dielectric constant, and large figure of merit, these features make it also widely used in electro-optic applications.


  • Optical Properties

1) Large nonlinear optical (NLO) coefficients

2) Wide angular bandwidth and small walk-off angle

3) Broad temperature and spectral bandwidths

4) High electro-optic (E-O) coefficient and low dielectric constant

5) Large figure of merit for an optical waveguide modulator

6) Non-hygroscopic, good chemical and mechanical properties


  • Applications

1) Frequency doubling (SHG) of Nd-doped lasers for green/red output

2) Frequency mixing (SFM) of Nd lasers and diode lasers for blue output

3) Parametric sources (OPG, OPA and OPO) for 0.6mm-4.5mm tunable output

4) E-O modulators, optical switches, directional couplers


  • Shenhua offers KTP specifications

Dimension Tolerance

(W±0.1mm)x(H±0.1mm)x(L+0.5/-0.1mm) (L≥2.5mm)
(W±0.1mm)x(H±0.1mm)x(L±0.1mm) (L<2.5mm)

Angle Tolerance

△θ≤±0.25°,△φ≤±0.25°

Wavefront distortion

≤ λ/8 @ 633nm

Flatness

≤ λ/8 @ 633nm

Parallelism

20’’

Perpendicularity

≤10

Clear Aperture

Central 90% of the diameter 

Surface Quality

10/5 to MIL-PRF-13830B

Chamfer

0.2mm x 45°

Damage Threshold

>1 GM/cm^2 @1064nm, 10ns, 10Hz (AR-coated)
>0.3 GM/cm^2 @532nm, 10ns, 10Hz (AR-coated)

Coating

AR coating or upon customers request

Quality Warranty Period

One year under proper use


“Contact us”

联系我们